![]() ![]() HIM has an extensive range of sustainable floor solutions that match perfectly with underfloor heating. With the above tips, you can use underfloor heating with any type of self-levelling floor, whether it is epoxy, polyurethane, ESD or modified epoxy. Never exceed a temperature of 28☌ of the floor surface. After curing, increase the temperature in steps of 5☌ per day to room temperature.Always place the self-levelling floor on a dry substrate.Also leave the floor heating off during the application of the self-levelling floor Switch off the underfloor heating at least 4 days before applying the self-levelling floor, in order not to have a too fast reaction.A heating protocol prevents shrinkage and expansion stresses because the floor heating is gradually and slowly brought up to temperature. To prevent the floor from cracking, a good heating protocol is of crucial importance.įor example, it is advisable to switch on underfloor heating in combination with an epoxy floor only after complete curing (about 7 days). It is therefore important to always repair existing cracks and other defects in the substrate if this is the case. As the crack size increases and the self-levelling floor can no longer bridge it, ripples will become visible in the casting floor itself. ![]() Self levelling floors adhere to the substrate, often sand cement or concrete. A self-levelling floor will never crack by itself. And therefore unsuitable for underfloor heating. Nevertheless, the story goes that self-levelling floors, including epoxy floors, are sensistive to cracks. This pleasant feeling is maintained when there are no radiators in the field of vision.Įpoxy floor and underfloor heating a good combination? Self levelling floors have a neat, seamless finish that seems to blend into the room space. This makes valuable wall and floor space ‘free’ that you can use for other purposes. With underfloor heating, radiators that take up a lot of space are superfluous.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |